It will take 5 to 8 months gather all of the pieces. Major flaw with this is the cost of parts (not Labor) I spent about $1500 in parts alone. Reassembly go to an alignment shop and get the front end aligned.įor any one that is interested in this. Bolt up the transfer case, connect wiring, install front drive ReplaceĬross member, starter, new drive shaft, cat, and Old transmission fluid will be awful to the ear. Along with fluid changes, terrible sounds will come from the transmission. The transmission fluid needs to be replaced every 30,000 to 60,000 miles. Install the new transmission hump plate and cut the carpet for the DecemThe 2020 Ford Explorer transmission problems are stuck in gear and jerks. To be finished or your father to get off of work to help. Note: most wheels will need new center caps. Reassemble in the same order as the removal of the 2wd.īut not new calipers. Side 4x4 I-beam, and then the driver side. On the 2wd it is on the inside of the engine cross member on the 4x4 it Rear I-beam drop bracket must be changed out. Remove the steering linkages, springs, and radius arm bolts. I am writing this out for anyone who is crazy as I was to do this. ThisĬonversion is for '91-'94 Explorers with manual transmissions.Īssembly with gears to match your rear ratio.įirst Thing I did was do about a year and a half of research. Ford Explorer Two Wheel Drive to Four Wheel Drive ConversionĬonversion is having all of the parts you need to do the conversion.
